| Type: | PVC Extruded |
|---|---|
| Material: | UPVC |
| Forming Way: | Extrusion |
| Application: | Decoration Parts, Window and Door Making |
| Material Properties: | Chemical Resistance |
| Markets Served: | Building & Construction |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Highly Resistence 70mm Window Profile UPVC Profile Doors |
Lumei 70 System which applies advantage design ideas such as section bar design featuring six cavities, thick wails arid large sections, energy-saving glass installation design and unique wall installation technologies at door openings is the most high-end energy-saving window and door system in China. This product is especially suitable for severe cold areas, which is mainly used in the window and door systems of villas and high-end civil buildings The advantages of 70 open doors and windows series: - The main section bar with a six-cavity structure has good thermal-insulating and energy-saving effects, which is one of the most high-end section bar systems in the current market. - It applies independent drainage cavity design to improve the drainage performance of finished windows. - It can be designed into in-swinging casement windows, inward tilt-turn windows, fixed windows, etc. - Through connection materials, it can form connection in any angle. - It can be equipped with three-layer and double-layer hollow glass at large intervals. - With simple, utility and highly operable technologies, it is suitable for industrial production. - 4-level air tightness, 3-level water tightness, 4-level wind pressure resistance and 8-level thermal insulation. |
| Energy Saving Index Parameters |
| Profile structure: 6 charmbers with triple seal |
| Heat transfer coefficient: uf=1.0w(k.m2) |
| Wind load resistance: up to 6500Pa |
| Different requirements for heat transfer coefficient | Glass Maching |
| 1.8w/(k.m2) | 1.05 (5+12Ar+5+12A+5Low-E) Triple glass |
| 2.0w/(k.m2) | 1.42 (5+12A+5+12A+5) Triple Glass |
| 2.1w/(k.m2) | 1.45 (5+9Ar+5+9A+5) Triple Glass |
| 2.4w/(k.m2) | 1.52 (5+9A+5+9A+5) Triple Glass |
| 2.6w/(k.m2) | 1.36 (5+12Ar+5Low-E) Double glass |
| 2.0w/(k.m2) | 1.9(5+12A+5) Double glass |
| 2.1w/(k.m2) | 1.75 (6+9A+6) Double glass |
| 70mm uPVC Profile use for Triple seal and Double glass window |
| Certification of upvc profile: --Lumei upvc profiles are lead free and all of products are ensured by CE/RoHS/ISO9001 Certification --Lumei upvc profile are 100% raw material 100% recyled materials .Really environmentally friendly --Lumei upvc profile have special products have been added, and a sufficient amount of UV absorbers, titanium dioxide, has been added to achieve anti-aging, anti-oxidation and anti-ultraviolet effects. --The surface of the Lumei upvc profile product is smooth, it is not easy to accumulate dust, easy to clean. --Lumei upvc profile The multi-cavity design structure prevents the heat from being dissipated too quickly, thereby making the heat preservation performance good, and the upvc material is not easy to be burned due to the addition of the flame retardant material. How to clean upvc profile and upvc windows ? In order to give full play to the advantages of plastic steel doors and windows, and extend the service life of plastic steel doors and windows, in the course of use, attention should also be paid to the maintenance and maintenance of plastic steel doors and windows: 1. The dust on the doors and windows should be cleaned regularly to keep the doors, windows, glass and hardware clean and bright. 2. If the doors and windows are contaminated with oil stains and other difficult to clean things, you can use Jieer Liang to scrub, and it is best not to use strong acid or strong alkali solution for cleaning, which will not only damage the surface finish of the profile, but also damage the surface of the hardware. The protective film and oxide layer cause corrosion of the hardware. 3. The granules and other debris on the inside of the frame should be cleaned in time to prevent the drainage channel from being blocked and causing poor drainage and water leakage. 4. When opening the door and window, the intensity should be moderate, try to keep the speed even when opening and closing. 5. Try to avoid hitting the door or window with a hard object or scratching the surface of the profile. 6. When the door and window are found to be inflexible or other abnormal conditions during use When the door and window installation team of the assembly factory completes the installation of doors and windows, due to the carelessness of the wall decoration personnel, the thickness of the filling foaming agent often appears uneven or adhered to the steel doors and windows. Sometimes, stubborn marks are also present. At this point, we can: A. Use a blade to level the area of the fill and smooth it with sandpaper. B. If the paint is decorated, the shovel can be treated with the same color paint. C. Scrub the surface of the profile with water to remove general dust. D. Use a white cotton gauze with ethyl acetate to scrub the stubborn stains, then scrub with water. |
| If you have any needs welcome to contact me ! |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}